Shenyang Torch-Bigtide Digital Technology Co. Ltd. 19LCD1928M 사용자 설명서
Last change:
2012-3-1
2012-3-1
User Manual
HL1928M-L/R
Page 4 of
32
2. Declarations
Safety precautions
WARNING
:
To avoid risk of electric shock, this equipment must only be connected to a
supply mains with protective earth.
supply mains with protective earth.
APPLIANCE COUPLER
or separable plug of is used as isolation means to isolate the
equipment from mains supply.
Accessory equipment connected to the analog and digital interfaces must be
certified according to the respective IEC/EN standards (e.g. IEC/EN 950 for data
processing equipment and IEC/EN 60601-1 for medical equipment ).
certified according to the respective IEC/EN standards (e.g. IEC/EN 950 for data
processing equipment and IEC/EN 60601-1 for medical equipment ).
Furthermore all configurations shall comply with the valid version of the system
standard IEC/EN 60601-1-1.Everybody who connects additional equipment to
the signal input connector or signal output connector configures medical system,
and is therefore responsible that the system complies with the requirements of
the valid version of the system standard IEC/EN 60601-1-1.If in doubt, consult
our technical service department or your local distributor.
standard IEC/EN 60601-1-1.Everybody who connects additional equipment to
the signal input connector or signal output connector configures medical system,
and is therefore responsible that the system complies with the requirements of
the valid version of the system standard IEC/EN 60601-1-1.If in doubt, consult
our technical service department or your local distributor.
Regular maintenance and calibration are recommended
Please note that liquid crystal displays such as the HL1928M do not have a
failure rate of zero and image parameters may change over time (e.g.
luminance or discoloration). Please ensure that all measures are taken to
prevent injuries or incorrect diagnoses. Regular maintenance and calibration
are recommended.
failure rate of zero and image parameters may change over time (e.g.
luminance or discoloration). Please ensure that all measures are taken to
prevent injuries or incorrect diagnoses. Regular maintenance and calibration
are recommended.
Correct and safe operation of the flat panel displays is dependent on proper
transport, storage, installation and assembly, as well as careful operation and
maintenance. The units must only be used for applications for which monitors
are normally used. The information in the Section "Technical data" must be
observed exactly.
transport, storage, installation and assembly, as well as careful operation and
maintenance. The units must only be used for applications for which monitors
are normally used. The information in the Section "Technical data" must be
observed exactly.
For the sake of safety, the following precautions must be observed:
Medical Equipment
With respect to electric shock, Fire and mechanical
hazards only in accordance with UL 60601-1
and CAN/CSA C22.2 No. 601.1
With respect to electric shock, Fire and mechanical
hazards only in accordance with UL 60601-1
and CAN/CSA C22.2 No. 601.1