Atech OEM Inc. WM100X 사용자 설명서
iWEM-1000UM, Dec 30, 2010
Atech Technology Co., Ltd.
7F, AAEON Building, No.43, Sec. 4, Keelung Rd, Taipei City 10607, Taiwan (R.O.C.)
Tel: +886-2-2377-0282
Fax: +886-2-2377-0283
http://www.atechoem.com/
Baud rate: 115200 MTU: 1400 Flush Timeout: 10
MAC Address: 00:12:34:56:78:9a
WLAN mode: 0 (Join an existing network)
SSID: Atech525A3 Channel:6 - Auth'ed, Assoc'ed
12 transmits 0 retries
Tx rate is 24Mbit/s. Autorate 1
Retries per rate: 4 Retry limit 12
802.11 interface is UP
IP: 192.168.0.103 NM: 255.255.255.0 GW: 192.168.0.1
Local Port: 1000
Host IP: 192.168.0.100 Remote port: 2000 Protocol: 1
(TCP client / Connected)
get_uart <uart_setting><CR>
Get UART port setting. The output reflects the setting stored
in the flash memory, The setting will take effect after reboot.
Example:
Baud rate: 9600
MTU: 1400
Flush Timeout: 10
get_wlan <wlan_setting><CR>
Get WLAN setting. The output reflects the setting stored in
the flash memory, The setting will take effect after reboot.
Example:
ANT: 0
WLAN Mode: 0 (Infrastructure)
SSID: Atech
Channel: 1
Preferred Rates: 24M 12M 5M 1M
get_ip <network_setting><CR>
Get Network setting. The output reflects the setting stored in
the flash memory, The setting will take effect after reboot.
Example:
DHCP is OFF
IP: 192.168.2.138
NM: 255.43.255.0
GW: 192.168.2.253
DNS: 168.95.192.1
Local Port: 1000