Atech OEM Inc. WM100X 사용자 설명서
iWEM-1000UM, Dec 30, 2010
Atech Technology Co., Ltd.
7F, AAEON Building, No.43, Sec. 4, Keelung Rd, Taipei City 10607, Taiwan (R.O.C.)
Tel: +886-2-2377-0282
Fax: +886-2-2377-0283
http://www.atechoem.com/
Host IP: 192.168.2.254
Remote port: 2000
Protocol: 1 (TCP client)
5. Default
Setting
The following sections describe the default settings when iWEM-1000 is out of Atech factory. The user can
issue set_factory_defaults to put the module back to factory default settings. The user can also toggle the
factory default pin in specified sequence to put iWEM-1000 into factory default settings.
5.1. WLAN
SSID: atech
802.11 Channel: 1
Mode: Infrastructure
Antenna: 0
Security: WPA-PSK
WPA Password: 12345678
Preferred Data Rates: 24M, 12M, 5M, 1Mbps
5.2. Network
DHCP: ON
Remote TCP server: 192.168.0.100
Remote TCP server port to connect: 2000
Local IP address: 0.0.0.0
Local port: 1000
Netmask: 255.255.255.0
Gateway: 0.0.0.0
Protocol: TCP client
5.3. UART
Baudrate: 9600
Flow control: No flow control
MTU: 1400 bytes
Flush Timeout: 10 ms