Essence Security International ltd. ES7502HC 사용자 설명서
Installing the CP
Care@Home™ Control Panel Next Generation User Guide
11
9. Replace the back cover.
Figure 11: Replace the CP Back Cover
10. For the PSTN model, connect the CP to the landline.
Two PSTN phone sockets (RJ-11) are provided on the back of the CP PSTN model:
Figure 12: The PSTN Phone Sockets
i.
Connect the phone cable between the LINE IN socket and the home phone jack. The
telephone cable used should be at least of 26 AWG.
telephone cable used should be at least of 26 AWG.
ii.
Optionally, you can connect a telephone to the TO PHONE socket, using the cable included
in the Care@Home™ PERS kit.
in the Care@Home™ PERS kit.
11. Move the power switch to ON. The CP switches to Stand By mode. In this mode:
The Power LED is green.
The Communication LED is red.
In some cases, such as when the CP is pre-configured, the ring around the EMERGENCY CALL
button is blue.
button is blue.
2.4. Wall Mounting the CP
The CP can be placed on a tabletop or mounted on a wall with screws.