Essence Security International ltd. ES800MGL 사용자 설명서
Installing WeR@Home™
26
WeR@Home™ Installation Guide
g. Press the tamper switch several times.
Figure 34: Pressing Tamper
h. Insert three AA alkaline batteries, observing the correct polarity.
Figure 35 – Inserting Batteries
If the tag reader is included in the WeR@Home
™
kit, skip to step 4.
When pairing is successful, a window appears prompting you to configure the tag reader.
i. Enter a name and/or location for the device.
j. Tap
to configure the tag reader:
outdoor use
indoor use
k. If the tag reader is configured for outdoor use and you want to use the tag reader as a
doorbell, tap Configure, for bell, tap
, and tap OK. Otherwise, tap OK.
4. Align the mounting base onto the tag reader, guided by the curved latch tabs and the tamper
switch and slide the base into place.
Tamper switch