Teltronic AG 812675 사용자 설명서

If this equipment does cause harmful inter-
ference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encoura-
ged to try to correct the interference by one
or more of the following measures:

R

Reorient or relocate the receiving
antenna.

R

Increase the separation between the
equipment and receiver.

R

Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.

R

Consult the dealer or an experienced
radio/TV technician for help.

i

Licence exempt
This device complies with Industry Canada
licence-exempt RSS standard(s). Opera-
tion is subject to the following two conditi-
ons:
(1) this device may not cause interference,
and
(2) this device must accept any interfe-
rence, including interference that may
cause undesired operation of the device.

X

The fuel tank must be at least one-quarter
full.

X

Set the desired temperature using the tem-
perature control of the heating or the air-
conditioning system .

X

Set the air distribution as required .

X

Open the center and side air vents and set
them to the middle position .

i

The auxiliary heating automatically swit-

ches to heater booster mode after the
engine is started.

:

To switch the auxiliary heating on/off

;

To switch the heater booster function on/
off (

X

To switch on the auxiliary heating: press

the y switch for longer than
2 seconds.

R

The auxiliary heating heats or ventilates
the interior to the temperature that you
have set.

R

The blower switches to the first level.

R

The red indicator lamp in the switch
comes on.

X

To switch off the auxiliary heating: press

the y switch.

or

X

Turn the key to position 

0 in the ignition

lock.
The red indicator lamp in the switch goes
out.
The auxiliary heating operates for approxi-
mately another 2 minutes and then swit-
ches off automatically.

You can use the on-board computer to define
up to three switch-on times, one of which can
be selected.

Z

10).