Philips Electronics Singapore Pte Ltd BC15348 사용자 설명서

8

If none of the codes listed for your brand of device operate the device correctly, you can
search through the code library for a valid code.

1. Turn on the device you wish to program for use with the remote control.

2. Point the remote control at the device.

3. Press and while holding a selected mode key (TV or DVD), press the OK key.

4. Release both the selected mode key and the OK key and all the mode keys will blink

twice. For example, to search for a TV code, press and hold OK and TV at the same
time.

5. Enter the programming code 9 2 2 by pressing the number keys on the remote control.

The selected mode key you selected in step 3 blinks twice indicating a successful
entry.

6. Point the remote toward the device, and press and hold PLAY 

. The remote

automatically tests each code in its library, beginning with the most common codes.

7. Without releasing the PLAY key, observe the device. When a usable code is found,

the device will respond by turning off. As soon as the device powers off, release the
PLAY key to temporarily pause the auto-search function until you choose one of the
following actions:

• Save code and exit—Press the ENTER key on the remote control to program the

code in the remote control and the mode key will flash three times indicating
successful entry.

• Step forward—Press the fast-forward (FF) key on the remote control to step ahead

through the codes one at a time. Then, return to step 6.

• Step backward—Press the rewind (REW) key on the remote control to step back

through the codes one at a time. Then, return to step 6.

• Exit without saving the code—Press the EXIT key on the remote control. The

selected mode key will flash three times and return to normal operation.

• Send the current code—Press the POWER key on the remote control to send the

current code. If the device turns back on, press the ENTER key. If the device does
not turn on, return to step 6.

• Continue with auto-search function–Press the PLAY key on the remote control to

continue with the auto-search function. Then, return to step 6.