K-jump Health Co. Ltd. TEMPONITOR 사용자 설명서
8
9
Error Message
Specifications
Power Source
6V ; 1.5Vdc AAA size battery X4
6V ; 1.5Vdc AAA size battery X4
DC
Measuring range
90.0 F ~ 109.9 F,(32.0 C ~ 43.9 C)
90.0 F ~ 109.9 F,(32.0 C ~ 43.9 C)
Resolution
0.1 F (
0.1 C)
Accuracy
0.2°F (±0.1°C): 93.2~107.6°F (32.0 ~
42.0°C).
0.4°F (±0.2°C): other range.
Operation Frequency
13.56MHz
13.56MHz
Operation Range
within 4cm diameter circle with distance
within 3cm.
within 4cm diameter circle with distance
within 3cm.
Memory
automatic display last measurement
automatic display last measurement
Low battery
Replace the batteries if the low battery
indicator appears.
Replace the batteries if the low battery
indicator appears.
Power OFF
Automatically after 1 minutes of non use.
Automatically after 1 minutes of non use.
Operating environment
+60.8 F~+104.0 F(
+60.8 F~+104.0 F(
16.0 C ~
40.0 C),at
95%RH
Storage environment
-68.0 F~+122.0 F(
-68.0 F~+122.0 F(
20.0 C ~
50.0 C),at
95%RH
or
No display
No display
Error Marks
Correction
The temperature
measured was higher
than the specified
operating range.
Please measure
again.
measured was higher
than the specified
operating range.
Please measure
again.
The temperature
measured was lower
than the specified
operating range.
Please measure
again.
measured was lower
than the specified
operating range.
Please measure
again.
Low Battery Indication
Replace four 1.5V
size AAA batteries
size AAA batteries
System Failure
The device is either
out of function or
unable to store
memory data. Check
with the dealer.
out of function or
unable to store
memory data. Check
with the dealer.
Transmission Failure
1. Re-position the
reader to closer
distance.
distance.
2. Replace a new patch
due to the one is
malfunction.
malfunction.
3. Replace the batteries.