ELDAT GmbH RT24 사용자 설명서
RT24
Hand Transmitter
RT24-3101M-01
RT24-3104M-01
LED
OPEN
STOP
Channel
selector
Mounting plate
CLOSE
RT24-3101M-03
RT24-3104M-03
LED
ON
Channel
selector
Mounting plate
OFF
Operating instructions
Safety advice
Carefully read through these
instructions before using the
transmitter!
instructions before using the
transmitter!
Note also the operating instructions of the
radio control(s)!
radio control(s)!
The hand transmitter should only be oper-
ated within sight of the devices to be con-
trolled! Otherwise persons could be placed
in danger!
ated within sight of the devices to be con-
trolled! Otherwise persons could be placed
in danger!
Have faulty hand transmitters checked by
the manufacturer!
the manufacturer!
Do not make any unauthorized alterations
or modifications to the hand transmitter!
or modifications to the hand transmitter!
Models / Features
RT24-3101M-01:
1 radio channel for controlling one device,
Functions: OPEN, STOP, CLOSE
1 radio channel for controlling one device,
Functions: OPEN, STOP, CLOSE
RT24-3101M-03:
1 radio channel for controlling one device,
Functions: ON and OFF
1 radio channel for controlling one device,
Functions: ON and OFF
RT24-3104M-01:
4 radio channels for separate or contempo-
raneous controlling (group function) of four
devices,
Functions: OPEN, STOP, CLOSE
4 radio channels for separate or contempo-
raneous controlling (group function) of four
devices,
Functions: OPEN, STOP, CLOSE
RT24-3104M-03:
4 radio channels for separate or contempo-
raneous controlling (group function) of four
devices,
Functions: ON and OFF
4 radio channels for separate or contempo-
raneous controlling (group function) of four
devices,
Functions: ON and OFF
Package content
- Hand transmitter incl. battery
- Mounting plate
- Programming connector
- Screws and anchors
- Adhesive pad
- Operating instructions
Using the hand transmitter
Start-up
The hand transmitter comes with a battery
already installed so, once unpacked, it is
ready for immediate use.
• Mount the transmitter to the wall using
already installed so, once unpacked, it is
ready for immediate use.
• Mount the transmitter to the wall using
the mounting plate.
• Transmit the channel(s) to the radio
controls of the devices to be operated.
For this read the operating instructions
supplied with the radio controls.
For this read the operating instructions
supplied with the radio controls.
Note for 4-channel transmitters: channel
selection is described in the chapter "Select-
ing channel".
selection is described in the chapter "Select-
ing channel".
Selecting channel
Only 4-channel transmitters:
Using the channel selector button, select the
channel of the device to be operated.
channel of the device to be operated.
2s
2s
2s
2s
2s
Channel 1
Channel 2
Channel 3
Channel 4
Channels 1-4
(Group function)
(Group function)
Each time you press the channel selector
button, you switch to the next channel or to
the group function (channel 1 > channel 2 >
channel 3 > channel 4 > channels 1-4/ group
function > channel 1 etc.).
The selected channel is signalled via the
LED’s as follows:
button, you switch to the next channel or to
the group function (channel 1 > channel 2 >
channel 3 > channel 4 > channels 1-4/ group
function > channel 1 etc.).
The selected channel is signalled via the
LED’s as follows:
Channel 1:
LED 1 lights up for approx. 2 secs.
Channel 2:
LED 2 lights up for approx. 2 secs.
Channel 3:
LED 3 lights up for approx. 2 secs.
Channel 4:
LED 4 lights up for approx. 2 secs.
Channels
1-4:
1-4:
LED’s 1-4 light up for approx 2 secs.
(group function)
(group function)
After the first pressing of the channel selector
button, the channel used last is selected.
button, the channel used last is selected.
Transmitting
• Press one of the function buttons (OPEN,
STOP, CLOSE or ON, OFF) in order to
control the corresponding device. The
LED of the corresponding channel briefly
lights up.
control the corresponding device. The
LED of the corresponding channel briefly
lights up.
(Only 4-channel transmitters) If the group
function is selected, all 4 devices are con-
trolled and all 4 LED’s briefly light up at the
same time.
function is selected, all 4 devices are con-
trolled and all 4 LED’s briefly light up at the
same time.
Troubleshooting
• If the LED(s) light up too faintly:
change the battery.
• If the LED(s) don't light up at all:
check that the battery is correctly poled.
• If the device still doesn't react:
go closer to the radio control or re-
transmit the transmitter channels to the
radio control.
transmit the transmitter channels to the
radio control.