BMI Technologies Inc. RFVI 사용자 설명서

DRAFT G FORCE PLUS RF Instruction Manual 

 

 

Doc #RF1 Rev.9 

Apr/08 

b.  Press {6} when the Data Logger displays “Action?(1-9)”.  The Data Logger will display 

“Action?(1-9) Prog Veh Settngs”  

c.  Press {Enter} to accept the choice.  The Data Logger will display “Select Slot:” 

d.  Press {1} to select slot #1.  The Data Logger will display “Select Slot: 1 Has Data”  

e.  Press {Enter} to accept the choice.  The Data Logger will display “Select Slot: 1 Ready” 

f.  Present the Data Logger to the Vehicle Interface. 

g.  The Data Logger will display “Progging Data:” and then 33%, 66%, and “All Data Prog’d”.   

h.  Listen for a sequence of three quick beeps to indicate the interaction is complete. 

i.  Remove the Data Logger from the Vehicle Interface.  The Vehicle Interface will display 

“PROGRAMMING SETTINGS COMPLETE” 

j.  Press {Cancel} on the Data Logger.  The Data Logger will display “Action?(1-9)”. 

8.  Remove the selected Vehicle Monitor from Maintenance Lockout. 

9.  Repeat steps 5 to 8 for the remaining Vehicles, matching the recorded Vehicles and memory slots.