Geonautics International Pte Ltd 30-0710 사용자 설명서

TAG-T3 Wombat – User Guide, 1.0.7  

The TAG-T3 Wombat Kit

 

 
External power can be fed to the Remote Downloader via the three pin 
connector located at the front of the device. This allows the unit to be 
powered externally to enable longer download times. A spare three 
pin Datamate connector and pins are provided for this connector. 4V 
to 10V can be fed through this connector. Pin out configuration is 
described in the following picture. 
 
 

 

Figure 4, DL1 – External Power Configuration 

 
 

 
An LED connected to the external Datamate connector (as shown in 

 above) enables the visual indication of: 

 

•  The start (triple flash) and end (on constantly) of the remote 

download process. 

•  Each time the packet receive process has been started, 

whereby a single flash will occur at a rapid rate during 
normal RF communications. 

 

© Geonautics 

13 

Law Enforcement ONLY