RLW Inc. RLW88844422 사용자 설명서
Operation Quick Start Guide
25
5. When the DAQ has started, you will see a green dot above the DAQ
associated with the WiTry™ System.
6. Verify settings by Expanding the DAQ segment, see Figure 4-6.
a. Expanding the Modbus DCM segment
i. The three (3) wSIM and one (1) Network Statistics Modbus
devices just installed are shown.
Figure 4-6: Running System 1® DAQ
4.1.4 Start System 1® Display
After starting the System 1® DAQ associated with the WiTry™ System, open up
the System 1 Display to view wSIM data.
the System 1 Display to view wSIM data.
1. Open System 1 Display
2. Select Enterprise >> Open >> Enterprise
3. Select the appropriate Enterprise for the WiTry™ System
4. Click <Connect>
5. Expand Instruments
6. Expand DAQ1 (or the appropriate DAQ Instrument if you have others
configured)
7. Expand Modbus Devices. You should see three (3) wSIM devices and one
(1) network statistics device.
8. If the system is configured properly, the four (4) Modbus devices
configured for the WiTry™ System should be blinking green, see Figure
4-7.
4-7.