Whirlpool Microwave Products Development Limited. RED78109Y 사용자 설명서
11
Control Lock
Activate to avoid unintended start. Touch the Control Lock keypad
for about 3 seconds until 2 tones sound and padlock icon appears
in the display. Repeat to unlock control.
for about 3 seconds until 2 tones sound and padlock icon appears
in the display. Repeat to unlock control.
Timer
With the microwave oven in Standby mode, touch the Timer
keypad, enter time, then touch the +30 Sec keypad. Cook
functions may be entered while the Timer is counting down. To
cancel timer, touch Timer keypad while the Timer countdown is
active in the display.
keypad, enter time, then touch the +30 Sec keypad. Cook
functions may be entered while the Timer is counting down. To
cancel timer, touch Timer keypad while the Timer countdown is
active in the display.
Options
CLOCK/OPTIONS allows access to the microwave settings.
To Use:
1. Touch CLOCK/OPTIONS. The oven display will scroll through
To Use:
1. Touch CLOCK/OPTIONS. The oven display will scroll through
the various options,
You can also touch CLOCK/OPTIONS repeatedly to manually
scroll through the list of options.
You can also touch CLOCK/OPTIONS repeatedly to manually
scroll through the list of options.
2. Touch the number keypad for the specific option to toggle the
function setup.
Tones
Tones are audible signals, indicating the following:
One beep
■
Valid keypad touch
■
Function has been entered
One chime
■
Preheat cycle has been completed
Three beeps
■
Invalid keypad touch
Three chimes
■
End of a cooking cycle
Four chimes
■
When timer reaches zero
Includes using the Timer for functions other than cooking.
Includes using the Timer for functions other than cooking.
Clock
The Clock is a 12-hour (12:00-11:59) or 24-hour (0:00-23:59)
clock. Touch CLOCK/OPTIONS to reach Clock submenu and
follow the prompts to set the Clock. Clock format (12 hours with
AM and PM, 12 hours without AM and PM, or 24 hours) may also
be set in the Clock submenu.
clock. Touch CLOCK/OPTIONS to reach Clock submenu and
follow the prompts to set the Clock. Clock format (12 hours with
AM and PM, 12 hours without AM and PM, or 24 hours) may also
be set in the Clock submenu.
Tone Volume
The volume is preset at low, but can be changed to high. Touch
CLOCK/OPTIONS and then the number “3” keypad to toggle
volume between high and low settings.
CLOCK/OPTIONS and then the number “3” keypad to toggle
volume between high and low settings.
End-of-Cycle and Reminder Tones
The Timed Cooking end-of-cycle and reminder tones are preset
on, but can be turned off. If all tones have been turned off, the
end-of-cycle and reminder tones cannot be independently turned
on. Touch CLOCK/OPTIONS and then the number “5” keypad to
toggle tones between On and Off settings.
NOTE: The Timer is not affected by these reminder tones.
on, but can be turned off. If all tones have been turned off, the
end-of-cycle and reminder tones cannot be independently turned
on. Touch CLOCK/OPTIONS and then the number “5” keypad to
toggle tones between On and Off settings.
NOTE: The Timer is not affected by these reminder tones.
Light Timer
Set the cooktop light to turn on and off at certain times. Touch
CLOCK/OPTIONS to reach the Light Timer submenu, and follow
the prompts to set the light on time and light off time in hours and
minutes or to cancel Light Timer.
NOTE: Light Timer uses 12-hour clock only.
CLOCK/OPTIONS to reach the Light Timer submenu, and follow
the prompts to set the light on time and light off time in hours and
minutes or to cancel Light Timer.
NOTE: Light Timer uses 12-hour clock only.
Filter Alert
Reset the filter status after replacing and/or cleaning the filters.
Touch CLOCK/OPTIONS to reach the Filter Alert submenu, and
activate reset.
Touch CLOCK/OPTIONS to reach the Filter Alert submenu, and
activate reset.
Sound (Tones)
Programming tones and signals. Programming tones may be
turned off or all tones (including end-of-function signals) may be
turned off. Touch CLOCK/OPTIONS to reach the Sound submenu,
and then follow the prompts to turn off or on the programming
tones or all tones.
NOTE: The Timer is not affected by reminder tones.
turned off or all tones (including end-of-function signals) may be
turned off. Touch CLOCK/OPTIONS to reach the Sound submenu,
and then follow the prompts to turn off or on the programming
tones or all tones.
NOTE: The Timer is not affected by reminder tones.
Scroll Speed
Scroll speed of the text may be adjusted. Touch the CLOCK/
OPTIONS to reach the Scroll Speed submenu and follow the
prompts to set speed.
OPTIONS to reach the Scroll Speed submenu and follow the
prompts to set speed.
Demo Mode
Activate to practice using the control without actually turning on
the magnetron. Touch CLOCK/OPTIONS to reach the Demo mode
submenu, then follow the prompts to activate. The DEMO icon will
light up in the display. Repeat to deactivate.
the magnetron. Touch CLOCK/OPTIONS to reach the Demo mode
submenu, then follow the prompts to activate. The DEMO icon will
light up in the display. Repeat to deactivate.
Energy Save
To conserve energy, the Clock will automatically turn off when
the microwave oven goes into Standby mode. Touch CLOCK/
OPTIONS to reach the Clock and Energy Save submenu, and
follow the prompts to turn on Clock.
the microwave oven goes into Standby mode. Touch CLOCK/
OPTIONS to reach the Clock and Energy Save submenu, and
follow the prompts to turn on Clock.
Language (Canada models)
Language of the display text may be changed. Touch the CLOCK/
OPTIONS to reach the Language submenu and follow the prompts
to set language to English or French.
OPTIONS to reach the Language submenu and follow the prompts
to set language to English or French.
Temp Calibration
The actual convection cooking temperature may be calibrated
higher or lower than the displayed temperature. For example,
if you want the microwave oven to be a bit hotter, you may try
setting the calibration to +10°. Touch CLOCK/OPTIONS to reach
the Calibration submenu. The current setting will appear in the
display with a checkmark next to it. Use number keypads to select
temperature variations in degrees Fahrenheit: 1 = ±0° (reset to
default), 2 = +5° (+2.8°C), 3 = +10° (+5.6°C), 4 = +15° (+8.3°C),
5 = +20° (+11.1°C), 6 = -5° (-2.8°C), 7 = -10° (-5.6°C), -8 = -15°
(-8.3°C) and 9 = -20° (-11.1°C).
NOTE: The microwave oven will remember the setting after a
power failure.
higher or lower than the displayed temperature. For example,
if you want the microwave oven to be a bit hotter, you may try
setting the calibration to +10°. Touch CLOCK/OPTIONS to reach
the Calibration submenu. The current setting will appear in the
display with a checkmark next to it. Use number keypads to select
temperature variations in degrees Fahrenheit: 1 = ±0° (reset to
default), 2 = +5° (+2.8°C), 3 = +10° (+5.6°C), 4 = +15° (+8.3°C),
5 = +20° (+11.1°C), 6 = -5° (-2.8°C), 7 = -10° (-5.6°C), -8 = -15°
(-8.3°C) and 9 = -20° (-11.1°C).
NOTE: The microwave oven will remember the setting after a
power failure.