RadioFrame Networks Inc MCSERIESHP10 사용자 설명서
Introduction
MC-Series High-Power System
998--01
Rev
X1
10
CONFIDENTIAL AND PROPRIETARY
RadioFrame Networks, Inc.
TRADE SECRET INFORMATION
1 Introduction
This MC-Series High Power Implementation Guide provides an overview of the
RadioFrame Networks High Power Microcell (MC-Series) system and describes
standards for installing, modifying and maintaining RadioFrame Networks equipment at
Sprint Nextel customer sites. All specifications and requirements pertain to MC-Series
system equipment operating in 800 and/or 900 MHz band(s) with high-power
amplification, as required in some Sprint Nextel iDEN (integrated Digital Enhanced
Network) installations. RadioFrame Networks recommends reading the entire manual
before attempting to install or operate RadioFrame Networks equipment.
RadioFrame Networks High Power Microcell (MC-Series) system and describes
standards for installing, modifying and maintaining RadioFrame Networks equipment at
Sprint Nextel customer sites. All specifications and requirements pertain to MC-Series
system equipment operating in 800 and/or 900 MHz band(s) with high-power
amplification, as required in some Sprint Nextel iDEN (integrated Digital Enhanced
Network) installations. RadioFrame Networks recommends reading the entire manual
before attempting to install or operate RadioFrame Networks equipment.
1.1 References
In addition to this manual, the following technical manuals are related to the MC-Series
High-Power system and may be needed for installation or maintenance.
High-Power system and may be needed for installation or maintenance.
• Generation 3 Site Controller System Manual, Motorola, 68P80801E30-O
• iDEN OMC-R Configuration Management Parameters Technical Manual, Motorola,
• iDEN OMC-R Configuration Management Parameters Technical Manual, Motorola,
68P80802E10
• Channel Service Unit (CSU) manufacturer’s documentation
• Cabinet manufacturer’s documentation (shipped with MC-Series system)
• Power supply and battery manufacturer's installation and maintenance
• Cabinet manufacturer’s documentation (shipped with MC-Series system)
• Power supply and battery manufacturer's installation and maintenance
documentation
• Distributed Antenna System (DAS) manufacturer's documentation
• General Dynamics R2660 Series Communications System Analyzer Operators
• General Dynamics R2660 Series Communications System Analyzer Operators
Manual, 68-P35270C001 Rev F
• Quality Standards—Fixed Network Equipment (FNE) Installation Manual (R56),
Motorola, R56 current edition
• National Electrical Code (NEC), current edition
• National Fire Protection Associations (NFPA) Code 70
• ASTM (American Society For Testing and Materials) 488-90
• Bellcore Technical Specifications 1089, GR-63-CORE
• National Fire Protection Associations (NFPA) Code 70
• ASTM (American Society For Testing and Materials) 488-90
• Bellcore Technical Specifications 1089, GR-63-CORE
1.2 General Safety Information
Read all the notices in this section prior to installing or using the MC-Series High-Power
system or any of its components.
system or any of its components.
1.2.1 Static Sensitive Precautions
Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. It
occurs when electronic printed circuit cards are improperly handled and can result in
complete or intermittent failures.
occurs when electronic printed circuit cards are improperly handled and can result in
complete or intermittent failures.
• Prior to handling, shipping, and servicing equipment, always put on a conductive
wrist strap connected to a grounding device to discharge any accumulated static
charges. All RFN FRUs ship with a disposable anti-static wrist strap.
charges. All RFN FRUs ship with a disposable anti-static wrist strap.