RadioFrame Networks Inc MCSERIESHP10 사용자 설명서
System Configuration Changes
MC-Series High-Power System
998--01
Rev
X1
102
CONFIDENTIAL AND PROPRIETARY
RadioFrame Networks, Inc.
TRADE SECRET INFORMATION
RFN software that supports software baselining. For SW download scenarios involving
other software upgrades or downgrades, please contact RFN Technical Support for
specific instructions
other software upgrades or downgrades, please contact RFN Technical Support for
specific instructions
(1-800-328-0847).
The procedure also assumes that the service laptop to be used for upgrading the system
software contains the system software load extracted to the root directory and that the
correctly configured FTP server is running on the laptop. If this software is not yet in
place, please start at section 8.1, “Upgrading MC-Series System Software”.
software contains the system software load extracted to the root directory and that the
correctly configured FTP server is running on the laptop. If this software is not yet in
place, please start at section 8.1, “Upgrading MC-Series System Software”.
1 Connect the laptop to the MC-Series system, start System Manager, and log in (for
complete instructions, refer to section 5.4 “System Setup”).
2 Navigate to the Software Download & System Reset page (Figure 73) by
selecting the
System Configuration tab and clicking on the Software Download &
System Reset link.
Note: Before starting the download (in step 3), be sure to clear any FTP Server Address
that shows up in the Remote Software Download Settings field. If you need to
clear an address from this field, you must click the Save Changes button.
clear an address from this field, you must click the Save Changes button.