SmartBridges Pte Ltd SPEEDTRAP2 사용자 설명서

 

3. 

Suitable cable ties should be used to hold the cable rigidly along its 
path. Make sure that the cable does not pull or cause strain on the 
weather proof connector on the airPoint XO™ devices. 

4. 

Do not make sharp bends. Provide bending radius of minimum 2 
inches (50mm). 

Refer to the cable and connector installation instructions placed inside the 
weatherproof connector for more detailed information. 

1. 

Power      

 

             :  Green 

2. 

Ethernet (Link, Activity)           :  Amber, Amber Blinking 

3. 

BW Controller (Link, Activity)  :  Blue, Blue Blinking 

4. 

RF (Link, Activity)                    :  Blue, Blue Blinking 

The product has reliable surge suppression capability. RJ45 data lines are 
clamped to 7.5V and the Transient Voltage Suppressor (TVS) provides 
protection against High Voltage transients. Grounding is achieved through 
the grounding stud at the back. The Gas Discharge Tube (GDT) is also 
provided to handle large surges. The airPoint XO™ devices, used along 
with the PoE Outdoor™, are extremely robust outdoor devices for WISPs. 
The airPoint XO™ series complies with CE and FCC standards for 
wireless installations.

 

The airPoint XO™ products are housed in a NEMA 4X weatherproof 
casing which is built to perform reliably under all climatic conditions, 
withstanding temperatures anywhere between -40°C and +60°C (-40°F to 
140°F).  

Multi-feature security, 128-bit WEP encryption and a built-in RADIUS 
client for authentication offer high security across the network. The 
airPoint XO™ has a special Timer Function to set time for next radio reset 
and a built-in temperature sensor.