Netgear 10300138 사용자 설명서

Mounting the ProSafe Wireless Access Point Using the 

Wall 

Mount Kit (Optional)

Before mounting the access point in a high location, first set up and test 

the access point to verify wireless network connectivity.

Disconnect the access point and position it where it will be deployed. The best location 

is elevated, such as on a wall or ceiling or the top of a cubicle, at the center of your 

 

 

 

Connect an Ethernet cable from your access point to a LAN port on your router, switch, or 

hub. If power is not provided by PoE, connect the power adapter to the wireless access 

point and plug the power adapter into a power outlet. The Power, LAN, and Wireless LAN 

LEDs should light up.

Configuring and Testing Your PCs for Wireless Connectivity

Program the wireless adapter of your PCs to have the same SSID and channel that you 
configured in the Wireless Settings for the access point. Check that they have a wireless 
link and are able to obtain an IP address by DHCP from the access point.