Netgear 11200162 사용자 설명서

Installing Your Wireless Router Manually (Advanced and Linux Users)

14

First, plug in and turn on the cable or DSL modem (if your modem has a backup battery, plug 

it back in). Wait 2 minutes.

Now, plug the power cord into your N750 wireless gigabit router and into a power outlet. Wait 

1 minute. 

Last, turn on your computer. It might take several minutes for your router to establish a 

connection with your computer and your Internet provider.

Verify that your router is connected correctly by checking the wireless router status lights (as 

Check the N750 wireless gigabit router status lights to verify the following:
• Power. The Power light (1) should turn solid green. If it does not, see 

.

• Internet. The Internet port light (2) should be lit. If it is not, make sure that the Ethernet cable 

is securely attached to the N750 wireless gigabit router Internet port and that the modem, and 

that the modem is powered on.

• Operating Mode. The 2.4 GHz N/G-Band light (3) should be on; the 5.0 GHz N-Band light 

(3) should be on. 

For DSL customers, if software logs you in to the Internet, do not run that 

software. You might need to go to the Internet Explorer Tools menu, select 

Internet Options, and then click the Connections tab, where you can select 
Never dial a connection

.