Netgear 14100256 사용자 설명서

a. Close the browser and launch it again.

b.  Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are 

using Internet Explorer, click the Refresh button to be sure that the Java applet is 
loaded.

c.  If you are using a wired connection, check the Ethernet connection between the 

computer and the router.

If the login prompt displays, but you cannot log in, try the following:

a. Make sure that you are using the correct login information.

The user name is admin and the default password is password. Make sure that 
Caps Lock is off when you enter this information.

b.  If you customized the IP address scheme that the router uses, see 

104.

If you can log in to your router, but it cannot access the Internet, see if the router can obtain 
an IP address from your Internet service provider (ISP). Unless your Internet provider 
assigned you a fixed IP address, your router requests an IP address from the Internet 
service. You can see if the request was successful using the Router Status screen.

The Setup Wizard can detect your Internet connection during 
installation, but if the router cannot get a WAN IP address, the Setup 
Wizard cannot automatically resolve this issue.

If you are attempting to set up your NETGEAR router as a replacement for an ADSL gateway 
in your network, the router cannot perform many gateway services. For example, the router 
cannot convert ADSL or cable data into Ethernet networking information. NETGEAR does not 
support such a configuration.



Launch a web browser from a computer or wireless device that is connected to the 
network.

In the address field of the web browser, enter www.routerlogin.net or 
www.routerlogin.com.

A login screen displays.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.

The BASIC Home screen displays.

Click the ADVANCED tab.

DRAFT