Netgear 14100256 사용자 설명서

The WiFi signal strength is weak.

Check these conditions:

Is your router too far from your computer, or too close? Move your computer near the 
router, but at least six feet (two meters) away, and see if the signal strength improves.

Is your WiFi signal blocked by objects between the router and your computer?

Your computer or wireless devices does not find your WiFi network.

Check the following:

Is the WiFi LED 

 on the router lit? 

If this LED is off, someone might have disabled the wireless radio or set up a wireless 
schedule. For more information about these settings, see 

68.

Did you disable the router’s SSID broadcast?

If you cleared the Enable SSID Broadcast check box in the Wireless Network screen, 
your wireless network is hidden and does not display in your wireless client’s 
scanning list. To connect to a hidden network, you must type the network name and 
the WiFi password. For more information about the SSID broadcast, see 

Does your computer or wireless device support the security that you are using for 
your WiFi network (WEP, WPA, or WPA2)? 

If the router does not save the changes you make through the NETGEAR genie screens, 
check the following:

When you log in to the router and change the settings on a screen, always click the Apply 
button before you move to another screen or tab, or your changes are lost. 

Click the Refresh or Reload button in the web browser. The changes might have 
occurred, but the old settings might be in the web browser’s cache.

DRAFT