Netgear DG834GT 사용자 설명서

Network and Routing Basics

B-11

A hacker may be able to prevent your network from operating or communicating by launching a 
Denial of Service (DoS) attack. The method used for such an attack can be as simple as merely 
flooding your site with more requests than it can handle. A more sophisticated attack may attempt 
to exploit some weakness in the operating system used by your router or gateway. Some operating 
systems can be disrupted by simply sending a packet with incorrect length information.

Although Ethernet networks originally used thick or thin coaxial cable, most installations currently 
use unshielded twisted pair (UTP) cabling. The UTP cable contains eight conductors, arranged in 
four twisted pairs, and terminated with an RJ45 type connector. A normal straight-through UTP 
Ethernet cable follows the EIA568B standard wiring as described below in 

.

Category 5 distributed cable that meets ANSI/EIA/TIA-568-A building wiring standards can be a 
maximum of 328 feet (ft.) or 100 meters (m) in length, divided as follows:

20 ft. (6 m) between the hub and the patch panel (if used)

295 ft. (90 m) from the wiring closet to the wall outlet

1

Orange/White

Transmit (Tx) +

2

Orange

Transmit (Tx) -

3

Green/White

Receive (Rx) +

4

Blue

5

Blue/White

6

Green

Receive (Rx) -

7

Brown/White

8

Brown