Netgear DG834Gv2 사용자 설명서
Reference Manual for the Model DG834G Wireless ADSL Firewall Router
Connecting the Router to the Internet
3-13
DNS servers are required to perform the function of translating an Internet name such as
www.netgear.com to a numeric IP address. For a fixed IP address configuration, you must
obtain DNS server addresses from your ISP and enter them manually here.
www.netgear.com to a numeric IP address. For a fixed IP address configuration, you must
obtain DNS server addresses from your ISP and enter them manually here.
3.
Click Apply to save the settings.
4.
Click the Test button to test your Internet connection. If the NETGEAR Web site does not
appear within one minute, refer to
appear within one minute, refer to
Chapter 7, “Troubleshooting”
.
Wizard-Detected Fixed IP (Static) Account Setup
If the router determines that your Internet service account uses Fixed IP assignment, you will be
directed to the page shown in
directed to the page shown in
below:
Figure 3-14: Setup Wizard menu for Fixed IP address
1.
If required, enter the Account Name and Domain Name from your ISP.
2.
Choose “Use Static IP Address” or “Use IP Over ATM” (IPoA — RFC1483 Routed)
according to the information from your ISP. If you choose IPoA, the router will be able to
detect the gateway IP address but you still need to provide the router IP address.
according to the information from your ISP. If you choose IPoA, the router will be able to
detect the gateway IP address but you still need to provide the router IP address.
3.
Enter your assigned IP Address, Subnet Mask, and the IP Address of your ISP’s gateway
router. This information should have been provided to you by your ISP. You need the
configuration parameters from your ISP you recorded in
router. This information should have been provided to you by your ISP. You need the
configuration parameters from your ISP you recorded in
.