Netgear fwag114 사용자 설명서
Reference Manual for the Model FWAG114 Cable/DSL Wireless ProSafe Firewall
1-6
Introduction
The Firewall’s Front Panel
The front panel of the FWAG114 wireless firewall contains the status LEDs described below.
Figure 1-1: FWAG114 Front Panel
You can use some of the LEDs to verify connections. Viewed from left to right,
describes the LEDs on the front panel of the router. These LEDs are green when lit.
The Firewall’s Rear Panel
The rear panel of the FWAG114 wireless firewall contains the port connections listed below.
Table 1-1.
LED Descriptions
Label
Activity
Description
POWER
On
Power is supplied to the firewall.
TEST
On
Off
Off
The system is initializing.
The system is ready and running.
The system is ready and running.
INTERNET
100 (100 Mbps)
On
Off
Off
The Internet (WAN) port is operating at 100 Mbps.
The Internet (WAN) port is operating at 10 Mbps.
The Internet (WAN) port is operating at 10 Mbps.
LINK/ACT
(Link/Activity)
On
Blinking
Blinking
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
Data is being transmitted or received by the Internet port.
LOCAL
100 (100 Mbps)
On
Off
Off
The Local port is operating at 100 Mbps.
The Local port is operating at 10 Mbps.
The Local port is operating at 10 Mbps.
LINK/ACT
(Link/Activity)
On
Blinking
Blinking
The Local port has detected a link with an attached device.
Data is being transmitted or received by the Local port.
Data is being transmitted or received by the Local port.
WLAN
On
The Wireless (WLAN) port is operating.
need product front panel photo