Netgear fwag114 사용자 설명서

6-2

Advanced Configuration

.

Use the Port Forwarding menu to configure the router to forward incoming protocols to computers 
on your local network. In addition to servers for specific applications, you can also specify a 
Default DMZ Server to which all other incoming protocols are forwarded. The DMZ Server is 
configured in the Security Menu.

Before starting, you'll need to determine which type of service, application or game you'll provide 
and the IP address of the computer that will provide each service. Be sure the computer’s IP 
address never changes. To configure port forwarding to a local server:

1.

From the Service & Game box, select the service or game that you will host on your network.

 

If the service does not appear in the list, refer to the following section, “

2.

Enter the IP address of the local server in the corresponding Server IP Address box.

3.

Click the Add button.

To define a service, game or application that does not appear in the Services & Games list, you 
must determine what port numbers are used by the service. For this information, you may need to 
contact the manufacturer of the program that you wish to use. When you have the port number 
information, follow these steps:

1.

Click the Add Custom Service button.

2.

Enter the first port number in an unused Start Port box.

3.

To forward only one port, enter it again in the End Port box. To specify a range of ports, enter 
the last port to be forwarded in the End Port box.

4.

Enter the IP address of the local server in the corresponding Server IP Address box.

5.

Type a name for the service.

6.

Click Apply at the bottom of the menu.

Note: If you are unfamiliar with networking and routing, refer to 

,” to become more familiar with the terms and procedures used in this manual.