Netgear WGX102 사용자 설명서

Wireless Configuration

4-9

8.

Configure and test your computers for wireless connectivity.

Program the wireless adapter of your computers to have the same SSID and channel that you 
configured in the router. Check that they have a wireless link and are able to obtain an IP 
address by DHCP from the firewall.

Warning: The Network Name (SSID) is case sensitive. If NETGEAR is the Network Name 
(SSID) in your wireless router, you must enter NETGEAR in your computer's wireless 
settings. Typing nETgear will not work.

Once your computers have basic wireless connectivity to the firewall, you can configure the 
advanced wireless security functions of the firewall.

To configure WEP data encryption, follow these steps:

1.

Log in to the WGX102 firewall at its default LAN address of 

 with 

its default user name of admin and default password of password, or using whatever LAN 
address and password you have set up.

2.

Click Wireless Settings in the main menu of the WGX102 firewall. 

3.

From the Security Options menu, select WEP. The WEP options display.

If you are configuring the firewall from a wireless computer and you change the 

firewall’s SSID, channel, or security settings, you will lose your wireless connection 
when you click on Apply. You must then change the wireless settings of your computer 
to match the firewall’s new settings.

If you use a wireless computer configure WEP settings, you will be disconnected 

when you click on Apply. You must then either configure your wireless adapter to match 
the wireless router WEP settings or access the wireless router from a wired computer to 
make any further changes.