ZTE Corporation RSUC869 사용자 설명서
Chapter 4 Hardware Decsripition
Table 4-1 ZXSDR RSUC Panel Button Description
Button
Description
RST
Reset button
4.4 Indicators
describes ZXSDR RSUC panel indicators.
Table 4-2 ZXSDR RSUC Panel Indicator Description
Indicator
Color
Meaning
Description
RUN
Green
Running status
indicator
Always on: The RSU is resetting or starting up.
Blinking at 1 Hz: The RSU is functioning properly.
Blinking at 5 Hz: The RSU is downloading version
files.
Off: The RSU fails the self-check.
ALM
Red
Alarm indicator
Off: There is on alarm or the RSU is resetting,
starting up, or downloading version files.
Blinking at 5 Hz: There is a critical alarm.
Blinking at 1 Hz: There is a minor alarm.
LNK
Green
Optical link status
indicator
Always on: The optical connection is normal.
Off: The optical fiber fails.
Blinking at 5 Hz: This link is used as the clock
reference source and the phase lock loop (PLL) is
in the fast capture state.
Blinking at 0.25 Hz: This link is used as the clock
reference source and the phase lock loop (PLL) is
in the tracing state.
RF
Orange
RF working
status indicator
Off: The RF has no output.
On: The RF has output.
4.5 Panel Interfaces
describes ZXSDR RSUC panel interfaces.
Table 4-3 Interfaces on the Front Panel of the ZXSDR RSUC
Interface
End A
End B
Description
ANT1(TX/RX)
RSU
Tx/Rx antenna
Connects to the Tx/Rx antenna for the Tx/Rx
major channel.
ANT2(RX)
RSU
Rx antenna
Connects to the antennal for the Rx minor antenna
4-3
SJ-20101019140047-002(R1.1)|25/12/2010
ZTE Proprietary and Confidential