Marasst Incorporation 03010 사용자 설명서
17
4. The camera and video monitor are now set to the same channel as
shown in the figure below.
5. If the monitor is set to audio/video mode (see page 12), an image
appears on the screen. If the monitor is set to audio mode, the mon-
itor speaker will play back audio.
itor speaker will play back audio.
6. If the video or audio quality is poor, try setting the camera and
video monitor to a different channel by following steps 2 and 3
above. Poor signal reception may be the result of interference from
other nearby wireless devices. Changing the channel can help
solve this problem. See the “Troubleshooting” section on page 26 for more information.
above. Poor signal reception may be the result of interference from
other nearby wireless devices. Changing the channel can help
solve this problem. See the “Troubleshooting” section on page 26 for more information.
Setting Channels for Multiple Camera Use
The Guardian Angel video monitor/receiver can receive audio and video
signals from up to four separate cameras/transmitters. Additional Guard-
ian Angel cameras/transmitters can be purchased from your dealer.
signals from up to four separate cameras/transmitters. Additional Guard-
ian Angel cameras/transmitters can be purchased from your dealer.
Channel 1 Indicator LED
Channel 1 Indicator LED
Channel Selector Button
Channel Selector Button
Marasst.book Page 17 Thursday, June 19, 2003 6:05 PM