Controlled Electronic Management Systems Ltd INFOPROX 사용자 설명서
InfoProx Hardware Installation
InfoProx Entry
InfoProx Entry Wiring: RJ45 Connections
If you use the InfoProx Entry in conjunction with the software utility, an RJ45
faceplate can be installed, preferably on the secure side of the door. The
installation of the faceplate facilitates the connection between the PC and the door
control unit by means of a patch cable through the RS485/232 converter. The
converter is connected to a serial port on the PC. Figure 6 illustrates the rear view
of a faceplate connection.
faceplate can be installed, preferably on the secure side of the door. The
installation of the faceplate facilitates the connection between the PC and the door
control unit by means of a patch cable through the RS485/232 converter. The
converter is connected to a serial port on the PC. Figure 6 illustrates the rear view
of a faceplate connection.
Figure 7: RJ45 Faceplate – Rear View
Power to the RS485/232 converter is supplied from the Phoenix Connector J3 to
pins 7 and 8 on the rear of the RJ45 female connector.
pins 7 and 8 on the rear of the RJ45 female connector.
20
Software
House