Controlled Electronic Management Systems Ltd INFOPROX 사용자 설명서
InfoProx Hardware Installation
InfoProx Entry
Installation Checklist
1.
Refer to Figure 2, Terminal and Power Connections. Remove the shipping
sticker from the sounder opening.
sticker from the sounder opening.
2.
Connect the power source to verify the InfoProx Entry door control unit is
working properly.
working properly.
3.
Recheck the wiring connections; ensure that all terminal screws are securely
tightened.
tightened.
4.
Secure the adapter plate to the containment box (if required for a U.S.
installation).
installation).
5.
Position the reader over the containment box and tighten the two security
screws, taking care not to over tighten.
screws, taking care not to over tighten.
6.
To prevent light from triggering the tamper sensor, verify that there are no
gaps around the unit.
gaps around the unit.
7.
Fit the cover buttons firmly in place over the screws.
To remove the cover buttons, use a screwdriver on the
outer edges to lift the covers.
outer edges to lift the covers.
Once the tamper sensor on the back of the unit is activated,
the reader will sound an alarm when exposed to light.
the reader will sound an alarm when exposed to light.
22
Software
House