Lee Technology Korea Co. Ltd. LTK-1100 사용자 설명서
LTK-1100 transmitter User’s manual
Thank you for purchasing LeeTek’s LTK-1100 transmitter” paging system.
We are confident our cutting edge products and first rate service will satisfy your needs for years
to come.Please read this “Welcome Pack” thoroughly to familiarize yourself with the procedures
for proper care of your system.
to come.Please read this “Welcome Pack” thoroughly to familiarize yourself with the procedures
for proper care of your system.
System Programming:
To enter programming mode, press the “SETUP” button and enter the password “1379” followed by
“enter”. If the password is accepted, the display will show “use * to scroll to menu options”.
(Use the “
To enter programming mode, press the “SETUP” button and enter the password “1379” followed by
“enter”. If the password is accepted, the display will show “use * to scroll to menu options”.
(Use the “
∗
/ Menu”
key to scroll through the different menu options or press “CANCEL” to exit the
system programming menu.)
1. Set the Current Time
• At the “Set Current Time” menu, set the hour then press “ENTER”
key.
• Set the minutes and press “ENTER” key.
• Use the “# /Select” key to select AM or PM.
• After the correct time is set, press the “ENTER” or “∗ / Menu” key to return to the main
• After the correct time is set, press the “ENTER” or “∗ / Menu” key to return to the main
menu or press the “CANCEL” key 2 times to exit the system programming menu.
.
.
2. Set the Sleep Shutdown Time
(Factory Default : ON – 1 AM)
This system has an “ALL SLEEP” function that turns off all battery pagers (for example,
manager pagers)at once automatically.
manager pagers)at once automatically.
To turn this feature off:
• Press
“#/Select” key to turn the sleep shutdown “OFF”
• Press enter to go back to the main menu.
To change the shutdown time:
• Press
“#/Select” key to turn the sleep shutdown “OFF”
• Set the hour then press “ENTER”
key.
• Set the minutes and press “ENTER” key.
• Use the “# /Select” key to select AM or PM.
• After the correct time is set, press the “ENTER” or “∗ / Menu” key to return to the main
• After the correct time is set, press the “ENTER” or “∗ / Menu” key to return to the main
menu or press the “CANCEL” key 2 times to exit the system programming menu.
3.
Range Test
(Factory Default : OFF)
With this feature you can determine what distance your transmitter will cover.
• Remove a couple of coasters from the charging stack.
• At the range test menu, press “#/Select” key to turn range test “ON”.
• Press “ENTER” to start the range test. As soon as range test is activated you’ll notice
the coasters flash once every 10 seconds (if you use pagers they will vibrate). Walk
around your property. When you reach the point where the coasters do not flash
consistently, this is your maximum range. If you would like to increase or decrease your
power level, exit range test and call 800-919-9903. We can walk you through changing
the power level of your transmitter.
around your property. When you reach the point where the coasters do not flash
consistently, this is your maximum range. If you would like to increase or decrease your
power level, exit range test and call 800-919-9903. We can walk you through changing
the power level of your transmitter.
• Press the “CANCEL” key to stop the range test. Press the “CANCEL” key again to exit
the system programming menu.
NOTE : The transmitter has an auto shut off feature that will stop the range test after 15 minutes.