Lee Technology Korea Co. Ltd. LTK-1100 사용자 설명서
4.
Set Pager Alert
(Factory Default: Flash & Vibe)
With this feature you have the option of changing the way your coasters alert the guest.
Be sure that all coasters are returned before performing this procedure.
To change the alert mode of your coasters follow these instructions:
• Remove all the coasters from the charging unit or unplug the power supply that is
Be sure that all coasters are returned before performing this procedure.
To change the alert mode of your coasters follow these instructions:
• Remove all the coasters from the charging unit or unplug the power supply that is
connected to the charging bases.
• At the “Set Pager Alert ” menu, press the “#/Select” key to scroll through the different
alert options.
• After making a selection, press the “enter” key 3 times. After sending the code, the
coasters will now respond with your new selection.
• Press
“CANCEL” key to exit the system programming menu
• Return all the coasters to the charging base or plug the power supply. The coasters are
ready to receive the page with the new alert.
5. Setting the Duty Alert (Factory Default: OFF)
This feature enables your transmitter to send a page, at a preset time, to a certain pager to
remind them of a duty required of them. For example, a busser can receive a page every 60
minutes to remind him to check the restrooms.
You can assign up to 3 different pagers to be duty alert pagers.
remind them of a duty required of them. For example, a busser can receive a page every 60
minutes to remind him to check the restrooms.
You can assign up to 3 different pagers to be duty alert pagers.
PROGRAMMING THE DUTY PAGER
• At the “Duty Alert” menu, press “#/Select” key to turn the duty cycle “ON” and press the
“ENTER” key.
• Enter the duty pager number and press “ENTER” key.
• Enter the cycle time (in minutes) and press the “ENTER” key.
• Enter the numeric message.
**If you are using a numeric pager as a duty pager, the numeric message will appear on
the pager display. With this feature you make up your own numeric codes telling the
patron what each code means. (Example: “201” message may mean clean kitchen;
“123” message may mean check bar food etc.)
the pager display. With this feature you make up your own numeric codes telling the
patron what each code means. (Example: “201” message may mean clean kitchen;
“123” message may mean check bar food etc.)
**If you are using a vibration only pager, you have the option of sending a distinctive
vibration to a pager by sending different messages.
vibration to a pager by sending different messages.
Message 11:
2 ea. 2 second vibrations Message 22:
3 ea. 3 second vibrations
Message 33:
4 ea. 2 second vibrations Message 44:
1 ea. 2 second vibration
Message 55:
2 ea. 1.5 second vibrationsMessage 66:
3 ea. 1 second vibrations
Message 911:
6 ea 1 second vibrations
• After setting the duty alert function, press “enter”. Display will show “Duty _ _ saved”.
• Press “CANCEL” to exit or press “ENTER” to continue entering the next duty pager
information.
6. Setting the “Out of Range” (for coasters only)
(Factory Default: OFF)
With this feature, the coasters will play a melody when taken out of range of the transmitter
to inform the guest that they are out of range and will miss their page. The melody will only
stop, when they return back within range.
to inform the guest that they are out of range and will miss their page. The melody will only
stop, when they return back within range.
Be sure that all coasters are returned before turning out of range on or off.
TURNING THE OUT OF RANGE ON
• Remove all the coasters from the charging unit or unplug the power supply that is
connected to the charging base