Agrident Corporation AWR100 사용자 설명서
08/10/2007
Vertraulich / Confidential
Page 5 of 31
AWR100
1. Preparing for Use
Figure 1: AWR100 Stick Reader
The AWR100 Stick Reader is shipped with one rechargeable battery pack, one RS232 cable
(1,5m), one power supply for trickle charging, two eartag transponders (one FDX-B and one
HDX) and AWR100 demo software.
Before starting it is recommended to charge the battery pack completely. This can be done by
using the power supply for trickle charging (takes min. 16 hours) or the external fast-charging
station (see chapter 1.1).
(1,5m), one power supply for trickle charging, two eartag transponders (one FDX-B and one
HDX) and AWR100 demo software.
Before starting it is recommended to charge the battery pack completely. This can be done by
using the power supply for trickle charging (takes min. 16 hours) or the external fast-charging
station (see chapter 1.1).
Antenna
RS232 cable
Battery pack
Read button
Handle grip
Cable connector
Beeper
LCD Display
Blue LED
End cap with RS232 and power interface
Red and green LED