Agrident Corporation AWR100 사용자 설명서
08/10/2007
Vertraulich / Confidential
Page 7 of 31
AWR100
1.2 Stick Reader Interface and signalling
Parameter
Setting
Red LED
The red LED is flashing during the Stick Reader tries
to read transponders. This behaviour can be disabled
or enabled by AWR100 demo software.
to read transponders. This behaviour can be disabled
or enabled by AWR100 demo software.
Green LED
The Green LED is flashing after a transponder was
read.
This behaviour can be disabled or enabled by
AWR100 demo software.
read.
This behaviour can be disabled or enabled by
AWR100 demo software.
Beeper
The Beeper is beeping after a transponder was read.
This behaviour can be disabled or enabled by
AWR100 demo software.
This behaviour can be disabled or enabled by
AWR100 demo software.
Blue LED
The blue LED is used for several events (e.g. trans-
ponder was read, low battery warning).
ponder was read, low battery warning).
LCD display
On the LCD display all necessary information's are
displayed (e.g. data of read transponder, ready to
work, menu items).
displayed (e.g. data of read transponder, ready to
work, menu items).
Read button
Switches the reader on
Starts reading
Enters the menu by a double clicking after press key
appears on the LCD display.
Starts reading
Enters the menu by a double clicking after press key
appears on the LCD display.
Screw on end cap
Changing battery pack and or end cap
Cable connector
Interface for transferring data between Stick Reader
and PC and for trickle charging via RS232 cable
and PC and for trickle charging via RS232 cable