Gemalto M2M GmbH EHS6-A 사용자 설명서
Cinterion
®
EHS6-A Hardware Interface Overview
Page 11 of 41
1.1 Key Features at a Glance
10
EHS6-A_HIO_v02.770
2014-08-13
Confidential / Preliminary
Power on/off
Switch-on by hardware signal AUTO_ON and ON
Switch-off by AT command
Switch-off by AT command
Switch off by hardware signal FST_SHDN instead of AT command
Automatic switch-off in case of critical temperature and voltage conditions
Reset
Orderly shutdown and reset by AT command
Emergency reset by hardware signal EMERG_RST
Emergency reset by hardware signal EMERG_RST
Feature
Implementation
Special features
Real time clock
Timer functions via AT commands
Phonebook
SIM and phone
TTY/CTM support
Integrated CTM modem
Evaluation kit
Evaluation module
EHS6-A module soldered onto a dedicated PCB that can be connected to
an adapter in order to be mounted onto the DSB75.
an adapter in order to be mounted onto the DSB75.
DSB75
DSB75 Development Support Board designed to test and type approve
Gemalto M2M modules and provide a sample configuration for application
engineering. A special adapter is required to connect the EHS6-A
evaluation module to the DSB75.
Gemalto M2M modules and provide a sample configuration for application
engineering. A special adapter is required to connect the EHS6-A
evaluation module to the DSB75.