Gemalto M2M GmbH ELS51-V 사용자 설명서
Cinterion
®
ELS31-V/ELS51-V Hardware Interface Overview
1.1 Key Features at a Glance
5
ELS31-V_ELS51-V_HIO_v00.502
2015-12-07
Confidential / Preliminary
Page 4 of 35
Power on/off, Reset
Power on/off
Switch-on by hardware signal ON
Switch-off by AT command
Switch off by hardware signal GPIO4/FST_SHDN instead of AT command
Automatic switch-off in case of critical temperature and voltage conditions
Switch-off by AT command
Switch off by hardware signal GPIO4/FST_SHDN instead of AT command
Automatic switch-off in case of critical temperature and voltage conditions
Reset
Orderly shutdown and reset by AT command
Emergency reset by hardware signal EMERG_RST
Emergency reset by hardware signal EMERG_RST
Evaluation kit
Evaluation module
ELS31-V / ELS51-V module soldered onto a dedicated PCB that can be
connected to an adapter in order to be mounted onto the DSB75.
connected to an adapter in order to be mounted onto the DSB75.
DSB75
DSB75 Development Support Board designed to test and type approve
Gemalto M2M modules and provide a sample configuration for application
engineering. A special adapter is required to connect the ELS31-V / ELS51-
V evaluation module to the DSB75.
Gemalto M2M modules and provide a sample configuration for application
engineering. A special adapter is required to connect the ELS31-V / ELS51-
V evaluation module to the DSB75.
Feature
Implementation