HIMS International Corporation B14K 사용자 설명서

9)  Tab to "Keep settings" and press "Enter". 

10) 

Tab to "Save Settings" and press "Enter". 

11) 

Tab to "Minimize" and press "Enter" to minimize the 

Window-Eyes Control Panel.   

  Note: You may need to restart Window-Eyes for Braille to begin 

displaying. 

 

4.4 Using the Smart Beetle with JAWS for Windows 

 Use the following instructions to set up the Smart Beetle as a Braille 
display with the JAWS screen reader from Freedom Scientific: 

1)  Make sure Smart Beetle is powered on and in "Pairing BRL" or 

"USB" Mode. If you are using USB, please connect the unit to the 
computer via the included USB cable.   

2)  Navigate to the JAWS Window and press "Alt" to open the menu.   

3) Press "Enter" on the "Options" menu. 

4) Use the Up or Down arrow to navigate to "Braille" and press 

"Enter". 

5) Choose HIMS Smart Beetle as your Braille device. 

6)  Tab to "Advanced" and press "Enter". 

7) Choose USB as the port if connecting via USB, or the correct 

Com Port if using Bluetooth. 

8)  Tab to "OK" and press "Enter". 

9)  You are prompted that you must restart JAWS for the settings to 

take effect. Restart JAWS for Windows, and Braille should begin 
displaying. 

 

4.5 Using Smart Beetle as a Braille display with NVDA 

  Use the following instructions to set up the Smart Beetle for use as a 
Braille display with the free NVDA screen reader from NV Access. 

1)  Make sure Smart Beetle is powered on and in "Pairing BRL" or 

"USB" Mode. If you are using USB, please connect the device to 
your computer via the included USB cable. 

2)  Press "NVDA key-N" to open the NVDA menu. 

3)  Arrow down to "Preferences" and press "Enter".