ADC Telecommunications Inc. F0684-112 사용자 설명서
Help Hot Line (U.S. only): 1-800-530-9960
7-57
D-620616-0-20 Rev F
CONFIDENTIAL
Connecting Contact Alarms to a Fusion Wideband System
7.7.1
Alarm Source
Fusion Wideband always acts as an alarm source, no matter what type of equipment
you are connecting to. Refer to Section 7.7.2 on page 7-60 if you want Fusion Wide-
band to sense Unison contact closures or other external alarms.
you are connecting to. Refer to Section 7.7.2 on page 7-60 if you want Fusion Wide-
band to sense Unison contact closures or other external alarms.
Using FlexWave Focus to Monitor Fusion Wideband
When you connect FlexWave Focus to the Fusion Wideband, the Fusion Wideband
Main Hub is the output of the alarms (alarm source) and Focus is the input (alarm
sense), as shown in Figure 7-33. Focus supports only faults (major errors).
Main Hub is the output of the alarms (alarm source) and Focus is the input (alarm
sense), as shown in Figure 7-33. Focus supports only faults (major errors).
Figure 7-33
Connecting FlexWave to Fusion Wideband
RF OUT
DOWNLINK
RF IN
UPLINK
FIBER
UPLINK
DOWNLINK
ALARM
RS-232C
FlexWave
Focus
RFM
Alarm
Sense
Sense
Alarm
Source
Source
Alarm
Source
Source
5-port Alarm Daisy-Chain Cable
May need
9-pin Adapter,
which ships
with the cable
9-pin Adapter,
which ships
with the cable
Fusion Main Hub
Band 1
Band 2
Band 3
UL1
UL2
UL3
DL1
DL2
DL3
AC Power
Alarms
Band 1
Band 2
Band 3
UL1
UL2
UL3
DL1
DL2
DL3
AC Power
Alarms