Honeywell International Inc. CS19A 사용자 설명서

3 - 21

To rename scanners with sequential, numeric names, scan the bar codes 
below.

Scan the Reset code after each name change and wait for the scanner 

to re-link to the base before scanning another bar code to rename the next 
scanner.

Alternatively, you may change the name with a bar code command if you cannot 
send serial commands to the base.  One way to do this is to scan the bar code 
below and scan a number for the scanner name.  For example, if you had 7 
scanners to one base, scan the bar code below with the first scanner, scan the 
1 

 inside the back cover of this manual and 

scan Save.  Then scan the Reset bar code and wait for the scanner to re-link to 
the base before scanning the next bar code.  Repeat that process for scanner 
number 2, 3, 4, etc.

Preliminary Draft