Adtran TRACERT1L7 사용자 설명서
P
AGE
36
61280.003L1-1B
4/12/99
A
LARM
P
AGE
This screen presents alarm information for the system. The T1A
or T1B alarms are described in the chapter entitled
“Troubleshooting.” If any of the T1A or T1B alarms are active, a
minor alarm will be indicated at the alarm contacts. The RF link
alarm will be activated when communication between the BBP
and the RFC has failed. Code Sync, Carrier Sync, and T1 Mux
Framer alarms indicate that various portions of the spread
spectrum data pump are not operating. Any of these alarms will
cause a major alarm to be activated at the alarm contacts.
or T1B alarms are described in the chapter entitled
“Troubleshooting.” If any of the T1A or T1B alarms are active, a
minor alarm will be indicated at the alarm contacts. The RF link
alarm will be activated when communication between the BBP
and the RFC has failed. Code Sync, Carrier Sync, and T1 Mux
Framer alarms indicate that various portions of the spread
spectrum data pump are not operating. Any of these alarms will
cause a major alarm to be activated at the alarm contacts.
TRACER Alarm Page
Site: Adtran
Site: Adtran
Code Sync Alarm Off
Carrier Sync Alarm Off
T1Mux Framer Alarm Off
Carrier Sync Alarm Off
T1Mux Framer Alarm Off
T1A T1B
RX LOS (Red) Alarm Off Off
RX AIS (Blue) Alarm Off Off
RX Yellow Alarm Off Off
BPV Alarm Off Off
TX AIS (Blue) Alarm Off Off
RX AIS (Blue) Alarm Off Off
RX Yellow Alarm Off Off
BPV Alarm Off Off
TX AIS (Blue) Alarm Off Off
=====================================================================
Press ‘m’ for Main Menu:
Press ‘m’ for Main Menu:
Figure 3-6. Alarm Page
T
EST
M
ENU
This screen allows each T1 to be put into loopback mode.
TRACER Test Menu
Site: Adtran
1) Local T1A Line Loopback
2) Local T1B Line Loopback
3) Local T1A Link Loopback
4) Local T1B Link Loopback
5) Remote T1A Link Loopback
6) Remote T1B Link Loopback
2) Local T1B Line Loopback
3) Local T1A Link Loopback
4) Local T1B Link Loopback
5) Remote T1A Link Loopback
6) Remote T1B Link Loopback
=====================================================================
Press ‘m’ for Main Menu:
Press ‘m’ for Main Menu:
Figure 3-7. Test Menu
S
ECTION
3