Adtran TRACERT1L7 Manual Do Utilizador

P

AGE

 36

61280.003L1-1B

4/12/99

This screen presents alarm information for the system.  The T1A
or T1B alarms are described in the chapter entitled
“Troubleshooting.” If any of the T1A or T1B alarms are active, a
minor alarm will be indicated at the alarm contacts.  The RF link
alarm will be activated when communication between the BBP
and the RFC has failed.  Code Sync, Carrier Sync, and T1 Mux
Framer alarms indicate that various portions of the spread
spectrum data pump are not operating.  Any of these alarms will
cause a major alarm to be activated at the alarm contacts.

                       TRACER Alarm Page
                   Site: Adtran

Code Sync Alarm         Off
Carrier Sync Alarm      Off
T1Mux Framer Alarm      Off

                        T1A                       T1B

RX LOS (Red) Alarm      Off                       Off
RX AIS (Blue) Alarm     Off                       Off
RX Yellow Alarm         Off                       Off
BPV Alarm               Off                       Off
TX AIS (Blue) Alarm     Off                       Off

=====================================================================
Press ‘m’ for Main Menu:

This screen allows each T1 to be put into loopback mode.

TRACER Test Menu

                   Site: Adtran

1) Local T1A Line Loopback
2) Local T1B Line Loopback
3) Local T1A Link Loopback
4) Local T1B Link Loopback
5) Remote T1A Link Loopback
6) Remote T1B Link Loopback

=====================================================================
Press ‘m’ for Main Menu:

S

ECTION

 3