Adtran TRC4106 사용자 설명서
TRACER 4206 System Manual
Section 5, User Interface Guide
612804206L1-1B
© 2002 ADTRAN, Inc.
43
3.
MENU DESCRIPTIONS
The remainder of this section describes the TRACER 4106/4206 menus and submenus.
>TRACER S
YSTEM
S
TATUS
Figure 2 shows the TRACER System Status menu page. Status of major system components for both sides
of the TRACER link are displayed, but no configuration can be performed from this view.
of the TRACER link are displayed, but no configuration can be performed from this view.
Figure 2. TRACER System Status
The top of the TRACER System Status menu page displays the elapsed time the TRACER 4106/4206
system has been operational since the last power reset. Located directly beneath the ADTRAN Technical
Support phone number is a graphical indicator of the status of the TRACER 4106/4206 T1 and RF links
(as reported by both the local and remote units). The
system has been operational since the last power reset. Located directly beneath the ADTRAN Technical
Support phone number is a graphical indicator of the status of the TRACER 4106/4206 T1 and RF links
(as reported by both the local and remote units). The
T1
labels will be reverse highlighted if any error
conditions exist on that T1 interface.
The status of the received radio link is indicated as
RF U
P
or
RF D
OWN
for each direction. The left portion
of the menu page reports the status of the local TRACER 4106/4206 (the system where the active terminal
is attached). The right portion of the screen reports the status of the remote system. If the RF link is down,
is attached). The right portion of the screen reports the status of the remote system. If the RF link is down,
D
ATA
N
OT
A
VAILABLE
will be displayed in place of the remote system status.
The menu structure of the TRACER 4106/4206 system is depicted below as follows:
>
>
M
ENU
P
AGE
>
M
ENU
P
AGE
>
M
ENU
S
ELECTION
>
M
ENU
P
AGE
>
M
ENU
S
ELECTION
>
S
UB
-M
ENU