Adtran TRC6420L2X 사용자 설명서
TRACER 6000 Series Integrated System Manual
Section 5 User Interface Guide
612806420L1-1E
Copyright © 2005 ADTRAN, Inc.
79
>E
THERNET
S
WITCH
C
ONFIGURATION
> P
ORT
X
The Quad Ethernet Switch module provides the capability to individually disable interfaces on the module.
Selecting
Selecting
D
ISABLE
from the
P
ORT
X
menu disables the port, stopping all data passing through the interface.
>E
THERNET
S
WITCH
C
ONFIGURATION
> S
PEED
/D
UPLEX
Defines the speed and duplex for the selected Ethernet interface. Available options are:
100/FDX
(100
Mbps with full-duplex operation),
100/HDX
(100 Mbps with half-duplex operation),
10/FDX
(10 Mbps
with full-duplex operation), and
10/HDX
(10 Mbps with half-duplex operation), and
A
UTO
(automatically
detects speed and duplex of the connection). The speed and duplex settings of the TRACER Ethernet port
and the attached Ethernet equipment should be identical; if the TRACER is set to auto-negotiation, the
attached equipment should also be set for auto-negotiation.When the
and the attached Ethernet equipment should be identical; if the TRACER is set to auto-negotiation, the
attached equipment should also be set for auto-negotiation.When the
S
PEED
/D
UPLEX
is manually set,
802.3u auto-negotiation is disabled; the Ethernet equipment connected to the manual port must be
manually set to the same speed/duplex settings. When set to
manually set to the same speed/duplex settings. When set to
A
UTO
, the actual negotiated speed and duplex
of the system can be displayed on the Ethernet Switch Status page.
> E
THERNET
S
WITCH
S
TATUS
Figure 29 shows the Ethernet Switch Status menu page, which displays the current speed and duplex
operation for each switch interface (on both the local and remote TRACER 64x0 systems) as well as
transmit and receive data statistics for the Ethernet interface (from both the local and remote TRACER
64x0 systems) and RF link.
operation for each switch interface (on both the local and remote TRACER 64x0 systems) as well as
transmit and receive data statistics for the Ethernet interface (from both the local and remote TRACER
64x0 systems) and RF link.
Figure 29. Ethernet Switch Module Status
>E
THERNET
S
WITCH
S
TATUS
> T
X
P
ACKETS
Displays a counter of all data packets transmitted out the local and remote TRACER 64x0 Ethernet
interfaces. Use this data as an indicator for how many packets are being transmitted between the four
Ethernet interfaces versus over the wireless link (WAN stats). The WAN statistics (Ethernet packets
transmitted over the RF link) provide a quick way to determine Ethernet packet loss over the wireless link;
the
interfaces. Use this data as an indicator for how many packets are being transmitted between the four
Ethernet interfaces versus over the wireless link (WAN stats). The WAN statistics (Ethernet packets
transmitted over the RF link) provide a quick way to determine Ethernet packet loss over the wireless link;
the
R
X
P
ACKETS
on the local system should match the
T
X
P
ACKETS
on the remote side (and vice versa).
>E
THERNET
S
WITCH
S
TATUS
> T
X
P
ACKETS
D
ROPPED
Displays a counter of all transmit data packets that were unable to be transmitted out the individual
Ethernet interfaces (for both the local and remote TRACER 64x0 units). Use this data as an indicator of
congestion on the Ethernet network segments. Dropped packets on the WAN interface can indicate that the
provisioned bandwidth for the switch module is insufficient.
Ethernet interfaces (for both the local and remote TRACER 64x0 units). Use this data as an indicator of
congestion on the Ethernet network segments. Dropped packets on the WAN interface can indicate that the
provisioned bandwidth for the switch module is insufficient.