Zebra Technologies Corporation RFID-Z4M-01 사용자 설명서

90

 

R4Mplus User Guide

LCD Error Conditions and Warnings

The LCD displays error condition messages and warnings if the printer detects a problem. The 
messages, along with their causes and solutions, are listed in 

RIBBON OUT

In thermal transfer mode, the 
ribbon is not loaded or loaded 
incorrectly.

Load the ribbon correctly. See 

.

In thermal transfer mode, the 
ribbon sensor is not sensing 
correctly loaded ribbon.

Perform the media and ribbon sensor 
calibration (see 

RIBBON IN

In direct thermal mode, when 
ribbon is not used:

Put the printer in direct thermal mode via 
the front panel and remove ribbon.

Ensure that the printer driver or software 
settings are correctly set.

PAPER OUT

The media is not loaded or 
loaded incorrectly.

Reload the media. See

The printer is set for 
non-continuous media, but 
continuous media is loaded.

Either load the correct media or set the 
printer for the correct media type via the 
front panel.

Ensure that the printer driver or software 
settings are correctly set.

Calibrate the printer (see

 

The incorrect media sensor is 
being used.

Via the front panel, locate the SENSOR 
SELECT menu item (

manually select the correct sensing 
method.