ZyXEL Communications Corporation AMG1312T10B 사용자 설명서
Chapter 25 Remote Management
AMG1312-T Series User’s Guide
212
Figure 121
Maintenance > RemoteMGMT > WWW
The following table describes the labels in this screen.
Table 89
Maintenance > RemoteMGMT > WWW
LABEL
DESCRIPTION
Server Port
This displays the service port number for accessing the AMG1312-T Series using HTTP or
HTTPS. If the number is grayed out, it is not editable.
HTTPS. If the number is grayed out, it is not editable.
Server Access
Select the interface(s) through which a computer may access the AMG1312-T Series
using this service.
using this service.
Note: It is recommended if you are allowing WAN access even temporarily to change the
default password (in Maintenance > User Account). To allow access from the
WAN, you will need to configure a WAN to Router firewall rule. See
WAN, you will need to configure a WAN to Router firewall rule. See
Section 4.1 on
page 34
for information on configuring firewall rules.
Secured Client IP
Address
Address
A secured client is a “trusted” computer that is allowed to communicate with the
AMG1312-T Series using this service.
AMG1312-T Series using this service.
Select All to allow any computer to access the AMG1312-T Series using this service.
Choose Range to just allow the computer(s) with an IP address in the range that you
specify to access the AMG1312-T Series using this service.
specify to access the AMG1312-T Series using this service.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.