ZyXEL Communications Corporation AMG1312T10B 사용자 설명서

Chapter 25 Remote Management

AMG1312-T Series User’s Guide

Use this screen to specify which interfaces allow FTP access and from which IP address the access 
can come. To change your AMG1312-T Series’s FTP settings, click Maintenance > RemoteMGMT 
> FTP. The screen appears as shown.

Maintenance > RemoteMGMT > FTP

The following table describes the labels in this screen. 

Simple Network Management Protocol is a protocol used for exchanging management information 
between network devices. Your AMG1312-T Series supports SNMP agent functionality, which allows 
a manager station to manage and monitor the AMG1312-T Series through the network. The 
AMG1312-T Series supports SNMP version one (SNMPv1) and version two (SNMPv2c). The next 
figure illustrates an SNMP management operation.

Maintenance > RemoteMGMT > FTP

Server Port

This displays the service port number for accessing the AMG1312-T Series. If the 
number is grayed out, it is not editable.

Server Access

Select the interface(s) through which a computer may access the AMG1312-T Series 
using this service.

Secured Client IP 
Address

A secured client is a “trusted” computer that is allowed to communicate with the 
AMG1312-T Series using this service. 

Select All to allow any computer to access the AMG1312-T Series using this service.

Choose Range to just allow the computer(s) with an IP address in the range that you 
specify to access the AMG1312-T Series using this service.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.