ZyXEL Communications Corporation NVG2053 사용자 설명서
NVG2053 User’s Guide
201
C
H A P T E R
1 9
Management
19.1 Overview
This chapter explains how to configure TR-069 and remote management on the
NVG2053.
NVG2053.
19.1.1 What You Can Do in this Chapter
• Use the TR-069 screen (
Section 19.5 on page 204
) to configure the NVG2053’s
TR-069 auto-configuration settings.
• Use the WWW screen (
Section 19.5 on page 204
) to configure the NVG2053’s
HTTP management settings.
• Use the Telnet screen (
Section 19.5 on page 204
) to specify which interfaces
allow Telnet access and from which IP address the access can come.
• Use the ICMP screen (
Section 19.6 on page 205
) to specify which of the
NVG2053’s interfaces will respond to Ping requests.
19.2 What You Need To Know
Firewall Rules
When you configure remote management to allow management from any network
except the LAN, you still need to configure a firewall rule to allow access. See
except the LAN, you still need to configure a firewall rule to allow access. See
Chapter 13 on page 251
for details on configuring firewall rules.
You can also disable a service on the NVG2053 by not allowing access for the
service/protocol through any of the NVG2053 interfaces.
service/protocol through any of the NVG2053 interfaces.
Remote Management Sessions
You may only have one remote management session running at a time. The
NVG2053 automatically disconnects a remote management session of lower
priority when another remote management session of higher priority starts. The
priorities for the different types of remote management sessions are as follows.
NVG2053 automatically disconnects a remote management session of lower
priority when another remote management session of higher priority starts. The
priorities for the different types of remote management sessions are as follows.