ZyXEL Communications Corporation NVG2053 사용자 설명서
Chapter 19 Management
NVG2053 User’s Guide
203
Click Configuration > Management > TR-069 to open the following screen.
Use this screen to configure your NVG2053 to be managed by an ACS.
Use this screen to configure your NVG2053 to be managed by an ACS.
Figure 87 Management > TR-069
The following table describes the fields in this screen.
Table 69 Management > TR-069
LABEL
DESCRIPTION
TR069
Select Enable to activate remote management via TR-069 on the
WAN. Otherwise, select Disable.
WAN. Otherwise, select Disable.
ACS URL
Enter the URL or IP address of the auto-configuration server.
ACS Username
Enter the TR-069 user name for authentication with the auto-
configuration server.
configuration server.
ACS Password
Enter the TR-069 password for authentication with the auto-
configuration server.
configuration server.
Connection
Request
Username
Request
Username
Enter the connection request user name.
When the ACS makes a connection request to the NVG2053, this user
name is used to authenticate the ACS.
name is used to authenticate the ACS.
Connection
Request
Password
Request
Password
Enter the connection request password.
When the ACS makes a connection request to the NVG2053, this
password is used to authenticate the ACS.
password is used to authenticate the ACS.
Periodic Inform
Interval
Interval
The NVG2053 can initiate a connection to the ACS using the pre-
configured address at any time.
configured address at any time.
Enter the time interval (in seconds) at which the NVG2053 sends
information to the auto-configuration server.
information to the auto-configuration server.
“0” means the NVG2053 will not establish periodic communication with
the ACS.
the ACS.
Apply
Click Apply to save your changes back to the NVG2053.
Cancel
Click Cancel to begin configuring this screen afresh.