Applied Concepts Inc ACMI005 사용자 설명서

Sport2 Owner’s Manual 

Holdover Delay: The time the speed reading is held after the target is lost and before the display 
screen clears. If off, the speed displays until the next speed is acquired. 

Trigger Function:   The Trigger settings are Con (Continuous), SS (Start / Stop), and Loc (Lock). 
The trigger settings function as follows: 

Transmit

Trigger Option

Action

 

 

 

OFF 

Con 

Pull to transmit, 

release to hold. 

 

SS 

Pull and release to transmit, 

Pull and release to hold. 

ON 

Loc 

Pull to lock and release the speed. 

Note:  When the Loc setting is selected in the Option Menu, the Transmit function is 

turned on the same as if the silver Transmit button is pressed. Clicking the trigger 
locks and releases the speed. 

Stopwatch Mode: This is available using the optional stopwatch cable. The stopwatch may be 
set to lap or split timer. The timer displays in the MESSAGE WINDOW. Press and hold the 
stopwatch trigger for 1 second to stop the timer and go back to radar mode. 

 

 

Lap Timer:  each press of the stopwatch trigger displays the time since the last trigger 

press, and resets the timer to 0.00.00 in the background. 

 

Split Timer: each press of the stopwatch trigger displays the current cumulative time. 

  

 

Timer Display Under 10 minutes: 

 

9.59.99      PEAK     8888 
 
 

XMIT  

8888

 

 

 

 

 

 

Timer Display Over 10 minutes: 

 

 

 

 

 

 

 

 

 

 

99.59.9      PEAK      8888  
 
 

XMIT  

8888

 

 

Serial Port Format: The “-“ (dash) is for no serial output, the A format is for Target Speed, and 
the AP format is for Peak Speed. 

** The Reset Confirmation step displays when the Reset option is set to YES.   

•  If YES, then the confirmation SURE? displays.  
•  To reset all settings to the factory defaults, select YES and then pull the trigger to 

exit.  

•  To not change the settings, select no and pull the trigger to exit. 

10