Digigram PCXES 사용자 설명서
D i g i g r a m
6
FEATURES
The LX6464ES is an audio card for PCI bus. It is Universal PCI (32-bit/66
MHz), which means it can be plugged in 32-bit/33 MHz 5 V keyed PCI slots
as well as in 64-bit/66 MHz 3.3 V keyed PCI slots. The cards are also
compatible with PCI-X interfaces.
MHz), which means it can be plugged in 32-bit/33 MHz 5 V keyed PCI slots
as well as in 64-bit/66 MHz 3.3 V keyed PCI slots. The cards are also
compatible with PCI-X interfaces.
LX6464ES main hardware features
•
64 EtherSound ES-100 mono inputs at 44.1 kHz or 48 kHz
•
64 EtherSound ES-100 mono outputs at 44.1 kHz or 48 kHz
•
1 standard Word Clock input
Main software features
•
Real-time, simultaneous record and playback in PCM (16 and 24 bits)
•
Low latency DirectSound and ASIO drivers
EtherSound features
•
EtherSound ES-100 compatible
•
The card can generate the network audio clock, or it can synchronize on
the network audio clock
the network audio clock
•
Network clock frequencies supported:
48 kHz if the card is the audio clock source for the network
44.1 kHz or 48 kHz if the card synchronizes on the EtherSound network
48 kHz if the card is the audio clock source for the network
44.1 kHz or 48 kHz if the card synchronizes on the EtherSound network
•
Audio sampling frequencies supported:
48 kHz, 96 kHz, 192 kHz at a network clock frequency of 48 kHz
48 kHz, 96 kHz, 192 kHz at a network clock frequency of 48 kHz
44.1 kHz, 88.2 kHz, 176.4 kHz at a network clock frequency of 44.1 kHz
∗
Note: the audio sampling frequency defines the number of available
inputs/outputs:
at 88.2 kHz or 96 kHz: 32 inputs and 32 outputs
inputs/outputs:
at 88.2 kHz or 96 kHz: 32 inputs and 32 outputs
at 176.4 kHz or 192 kHz: 16 inputs and 16 outputs
To define the audio sampling frequency settings, go to the Digigram control
panel (<Start> <Programs> <Digigram> <Digigram Control Center>).
Please refer to its online help.
panel (<Start> <Programs> <Digigram> <Digigram Control Center>).
Please refer to its online help.
∗
For the management of these modes, please refer to the corresponding question on our web
site in the FAQ section