MilDef Crete Inc. DR786EX 사용자 설명서
Maintenance/Service
33
MAINTENANCE / SERVICE
Cleaning
ALWAYS turn OFF the power, unplug the power cord before cleaning.
The exterior of the system and display may be wiped with a clean, soft, and lint-
free cloth. If there is difficulty removing dirt, apply non-ammonia, non-alcohol
based glass cleaner to the cloth and wipe.
free cloth. If there is difficulty removing dirt, apply non-ammonia, non-alcohol
based glass cleaner to the cloth and wipe.
An air gun is recommended for cleaning water and dust. For salty water
please clean with fresh water then blow-dry with an air gun.
please clean with fresh water then blow-dry with an air gun.
Troubleshooting
Should the computer fail to function properly, the troubleshooting steps below
may be followed.
may be followed.
• Check AC/vehicle adapter, battery, and the power source.
• Minimize the configuration, i.e., remove extra peripherals and devices.
• Remove the modules one by one (HDD, CD-ROM, FDD, Battery, etc.).
• Remove the software suspected.
• Set BIOS fail-safe default.
• Re-install operating system and application software.
• Minimize the configuration, i.e., remove extra peripherals and devices.
• Remove the modules one by one (HDD, CD-ROM, FDD, Battery, etc.).
• Remove the software suspected.
• Set BIOS fail-safe default.
• Re-install operating system and application software.
RMA Service
If troubleshooting steps are unsuccessful, consult your dealer for service. If it is
necessary to send in your computer for repairs, a representative from your
authorized technical support department will provide you with an RMA#. Only
after you have spoken with a technical support representative and received an
RMA# should you send in your computer.
Shipping instructions:
necessary to send in your computer for repairs, a representative from your
authorized technical support department will provide you with an RMA#. Only
after you have spoken with a technical support representative and received an
RMA# should you send in your computer.
Shipping instructions:
1. Remove any personal add-on devices, or other media.
2. Use the original shipping container and packing materials, if possible.
3. If the original packing materials are not available, wrap the equipment with
soft material (e.g., PU/ PE form) then put the wrapped equipment into a hard
cardboard shipping box.
cardboard shipping box.